Speedflow Aluminium Weld On Neck & Billet Aluminium Cap.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 25mm / 1" inch.
Cap Outer Diameter = 44mm
 Height with Cap Fitted = 28mm.

Speedflow Aluminium Weld On Neck & Billet Aluminium Cap.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 25mm / 1" inch.
Cap Outer Diameter = 44mm
 Height with Cap Fitted = 28mm.
Black

Speedflow Aluminium Weld On Neck & Billet Aluminium Cap.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 25mm / 1" inch.
Cap Outer Diameter = 44mm
 Height with Cap Fitted = 28mm.
Blue

Speedflow Aluminium Weld On Neck & Billet Aluminium Cap.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 25mm / 1" inch.
Cap Outer Diameter = 44mm
 Height with Cap Fitted = 28mm.
Red

Speedflow Stainless Steel Weld On Neck & Billet Aluminium Cap.
The Neck is manufactured from 316 Stainless Steel, the Cap is manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 25mm / 1" inch.
Cap Outer Diameter = 44mm
Height with Cap Fitted = 28mm.

Speedflow Stainless Steel Weld On Neck & Billet Aluminium Cap.
The Neck is manufactured from 316 Stainless Steel, the Cap is manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 25mm / 1" inch.
Cap Outer Diameter = 44mm
Height with Cap Fitted = 28mm.

Speedflow Stainless Steel Weld On Neck & Billet Aluminium Cap.
The Neck is manufactured from 316 Stainless Steel, the Cap is manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 25mm / 1" inch.
Cap Outer Diameter = 44mm
Height with Cap Fitted = 28mm.

Speedflow Stainless Steel Weld On Neck & Billet Aluminium Cap.
The Neck is manufactured from 316 Stainless Steel, the Cap is manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 25mm / 1" inch.
Cap Outer Diameter = 44mm
Height with Cap Fitted = 28mm.

Speedflow Aluminium Weld On Neck & Billet Aluminium Cap.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 38mm / 1.5" inch.
Cap Outer Diameter = 57mm
Height with Cap Fitted = 30mm.

Speedflow Aluminium Weld On Neck & Billet Aluminium Cap.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 38mm / 1.5" inch.
Cap Outer Diameter = 57mm
Height with Cap Fitted = 30mm.
Black

Speedflow Aluminium Weld On Neck & Billet Aluminium Cap.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 38mm / 1.5" inch.
Cap Outer Diameter = 57mm
Height with Cap Fitted = 30mm.
Blue

Speedflow Aluminium Weld On Neck & Billet Aluminium Cap.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 38mm / 1.5" inch.
Cap Outer Diameter = 57mm
Height with Cap Fitted = 30mm.
Red

Speedflow Aluminium Weld On Neck & Billet Aluminium Cap.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 52mm / 2" inch.
Cap Outer Diameter = 70mm
Height with Cap Fitted = 30mm.

Speedflow Aluminium Weld On Neck & Billet Aluminium Cap.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 52mm / 2" inch.
Cap Outer Diameter = 70mm
Height with Cap Fitted = 30mm.
BLACK

Speedflow Aluminium Weld On Neck & Billet Aluminium Cap.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 52mm / 2" inch.
Cap Outer Diameter = 70mm
Height with Cap Fitted = 30mm.
BLUE

Speedflow Aluminium Weld On Neck & Billet Aluminium Cap.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Size: Neck Inner Diameter = 52mm / 2" inch.
Cap Outer Diameter = 70mm
Height with Cap Fitted = 30mm.
RED

Made in Australia since 1983
Speedflow 460 Series -32  Stainless Steel Replacement Weld Neck
Neck I.D. : 52mm (2”)
Cap O.D. : 70mm
Height : 30mm

Made in Australia since 1983
Speedflow 460 Series -32  Stainless Steel Replacement Weld Neck
Neck I.D. : 52mm (2”)
Cap O.D. : 70mm
Height : 30mm
BLACK

Made in Australia since 1983
Speedflow 460 Series -32  Stainless Steel Replacement Weld Neck
Neck I.D. : 52mm (2”)
Cap O.D. : 70mm
Height : 30mm
BLUE

Made in Australia since 1983
Speedflow 460 Series -32  Stainless Steel Replacement Weld Neck
Neck I.D. : 52mm (2”)
Cap O.D. : 70mm
Height : 30mm
RED

Speedflow Female EGT Steel Weld On Cap Fitting

Speedflow 7/16”-20 Male K-Type EGT Steel Weld On Fitting

Speedflow -6AN Male Pushlock Hose Tail Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
These great allow the direct fitment of Speedflow 332, 400 & 598 series pushlock hose. Great for low pressure system like Breather Tanks & Header Tanks. Can also be used in hi pressure system but we recommend using pushlock hose clamps for a more secure connection.
Can also be used with rubber hoses with 3/8" Inner Diameter.

Speedflow -8AN Male Pushlock Hose Tail Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
These great allow the direct fitment of Speedflow 332, 400 & 598 series pushlock hose. Great for low pressure system like Breather Tanks & Header Tanks. Can also be used in hi pressure system but we recommend using pushlock hose clamps for a more secure connection.
Can also be used with rubber hoses with 1/2" Inner Diameter.

Speedflow -10AN Male Pushlock Hose Tail Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
These great allow the direct fitment of Speedflow 332, 400 & 598 series pushlock hose. Great for low pressure system like Breather Tanks & Header Tanks. Can also be used in hi pressure system but we recommend using pushlock hose clamps for a more secure connection.
Can also be used with rubber hoses with 1/2" Inner Diameter.

Speedflow -12AN Male Pushlock Hose Tail Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
These great allow the direct fitment of Speedflow 332, 400 & 598 series pushlock hose. Great for low pressure system like Breather Tanks & Header Tanks. Can also be used in hi pressure system but we recommend using pushlock hose clamps for a more secure connection.
Can also be used with rubber hoses with 3/4" Inner Diameter.

Speedflow Male Hose Tail Weld On Fitting suit 5/16" / 8.00mm Inner Diameter Rubber Hose.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
This fitting only requires a hose clamp to secure rubber hose.

Speedflow Male Hose Tail Weld On Fitting suit 3/8" / 10.00mm Inner Diameter Rubber Hose.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
This fitting only requires a hose clamp to secure rubber hose.

Speedflow Male Hose Tail Weld On Fitting suit 1/2" / 12.70mm Inner Diameter Rubber Hose.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
This fitting only requires a hose clamp to secure rubber hose.

Speedflow Injector Boss Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
This fitting is great for custom EFI applications weather adding a single injector to your current system or creating a whole new EFI manifold with multi-point injection. The long design allows you to choose a better line and direction for the injector and can be trimmed if needed.
To suit 14mm Oring Fuel Injectors.

Speedflow Oxygen Sensor Weld On Fitting.
Manufactured from 316 Stainless Steel.
Great for adding an extra O2 Sensore into your Exhaust System for either Dyno Tuning or Air/Fuel Ratio Meters/Gauges.

Speedflow -4AN Female ORB Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Male ORB Adapters (920 Series) are available is many sizes which allow you to select different size's of male AN adapters.
Machined with a step to allow the fitting to be welded from the inside for an even neater look.

Speedflow -6AN Female ORB Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Male ORB Adapters (920 Series) are available is many sizes which allow you to select different size's of male AN adapters.
Machined with a step to allow the fitting to be welded from the inside for an even neater look.

Speedflow -6AN Female ORB Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Male ORB Adapters (920 Series) are available is many sizes which allow you to select different size's of male AN adapters.
Machined with a step to allow the fitting to be welded from the inside for an even neater look.

Speedflow -8AN Female ORB Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Male ORB Adapters (920 Series) are available is many sizes which allow you to select different size's of male AN adapters.
Machined with a step to allow the fitting to be welded from the inside for an even neater look.

STEEL MALE -8AN WELD ON FITTING
THERE IS A HUGE RANGE OF WELD ON FITTINGS TO MAKE THE JOB OF FABRICATING A TANK, RADIATOR
OR YOUR SPECIALITY JOB A BREEZE.
SPEEDFLOW FITTINGS ARE MADE FROM MARINE QUALITY 6061 BILLET ALUMINIUM FOR STRENGHT, QUALITY OF FINISH, SUPERIOR CORROSION AND FATIGUE RESISTANCE.
MADE IN AUSTRALIA SINCE 1983
SUPERIOR DESIGN
COMPLETE RANGE FROM -3 TO -20
BILLET 6061 ALUMINIUM
CUTTER STYLE HOSE ENDS
HARD COAT ANODISING
ONE PIECE FORMED BENDS
STRONGEST AND MOST COMPACT
ROTATABLE AFTER ASSEMBLY
CHOICE OF MOTORSPORT PROFESSIONALS

Speedflow -10AN Female ORB Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Male ORB Adapters (920 Series) are available is many sizes which allow you to select different size's of male AN adapters.
Machined with a step to allow the fitting to be welded from the inside for an even neater look.

Speedflow -10AN Female ORB Weld On Fitting.
Manufactured from CS 1030 Steel and suitable for TIG & MIG welding.
Male ORB Adapters (920 Series) are available is many sizes which allow you to select different size's of male AN adapters.
Machined with a step to allow the fitting to be welded from the inside for an even neater look.

Speedflow -12AN Female ORB Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Male ORB Adapters (920 Series) are available is many sizes which allow you to select different size's of male AN adapters.
Machined with a step to allow the fitting to be welded from the inside for an even neater look.

Speedflow -12AN Female ORB Weld On Fitting.
Manufactured from CS 1030 Steel and suitable for TIG & MIG welding.
Male ORB Adapters (920 Series) are available is many sizes which allow you to select different size's of male AN adapters.
Machined with a step to allow the fitting to be welded from the inside for an even neater look.

Speedflow -16AN Female ORB Weld on any Fitting.
Manufactured from marine quality 6061-T6 billet aluminium superior corrosion fatigue resistance.

Speedflow 1/8"NPT Female Thread Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Male NPT Adapters (816 Series) are available is many sizes which allow you to select different size's of male AN adapters.

Speedflow 1/8"NPT Female Thread Weld On Fitting.
Manufactured from CS 1030 Steel and suitable for TIG & MIG welding.
Male NPT Adapters (816 Series) are available is many sizes which allow you to select different size's of male AN adapters.

Speedflow 1/4"NPT Female Thread Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Male NPT Adapters (816 Series) are available is many sizes which allow you to select different size's of male AN adapters.

Speedflow 3/8"NPT Female Thread Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Male NPT Adapters (816 Series) are available is many sizes which allow you to select different size's of male AN adapters.

Speedflow 1/2"NPT Female Thread Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Male NPT Adapters (816 Series) are available is many sizes which allow you to select different size's of male AN adapters.

Speedflow 3/4"NPT Female Thread Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.
Male NPT Adapters (816 Series) are available is many sizes which allow you to select different size's of male AN adapters.

Speedflow -3AN Male Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.

Speedflow -3AN Male Weld On Fitting.
Manufactured from CS 1030 Steel and suitable for TIG & MIG welding.

Speedflow -4AN Male Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.

Speedflow -4AN Male Weld On Fitting.
Manufactured from CS 1030 Steel and suitable for TIG & MIG welding.

Speedflow -6AN Male Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.

Speedflow -6AN Male Weld On Fitting.
Manufactured from CS 1030 Steel and suitable for TIG & MIG welding.

Speedflow -6AN Male Weld On Fitting.
Manufactured from 316 Stainless Steel.

ALUMINIUM MALE -8AN WELD ON FITTING
SPEEDFLOW PART NO. 999-08-D
 THERE IS A HUGE RANGE OF WELD ON FITTINGS TO MAKE THE JOB OF FABRICATING A TANK, RADIATOR
OR YOUR SPECIALITY JOB A BREEZE.
 SPEEDFLOW FITTINGS ARE MADE FROM MARINE QUALITY 6061 BILLET ALUMINIUM FOR STRENGHT, QUALITY OF FINISH, SUPERIOR CORROSION AND FATIGUE RESISTANCE.
MADE IN AUSTRALIA SINCE 1983
SUPERIOR DESIGN
COMPLETE RANGE FROM -3 TO -20
BILLET 6061 ALUMINIUM
CUTTER STYLE HOSE ENDS
HARD COAT ANODISING
ONE PIECE FORMED BENDS
STRONGEST AND MOST COMPACT
ROTATABLE AFTER ASSEMBLY
CHOICE OF MOTORSPORT PROFESSIONALS

Speedflow -8AN Male Weld On Fitting.
Manufactured from CS 1030 Steel and suitable for TIG & MIG welding.

ITEM INFORMATION:   
Speedflow -8AN Male Weld On Fitting.
Manufactured from 316 Stainless Steel.

Speedflow -10AN Male Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.

Speedflow -10AN Male Weld On Fitting.
Manufactured from CS 1030 Steel and suitable for TIG & MIG welding.

Speedflow -10AN Male Weld On Fitting.
Manufactured from 316 Stainless Steel.

Speedflow -12AN Male Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.

Speedflow -12AN Male Weld On Fitting.
Manufactured from CS 1030 Steel and suitable for TIG & MIG welding.

Speedflow -12AN Male Weld On Fitting.
Manufactured from 316 Stainless Steel.

Speedflow -16AN Male Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.

Speedflow -16AN Male Weld On Fitting.
Manufactured from CS 1030 Steel and suitable for TIG & MIG welding.

Speedflow -16AN Male Weld On Fitting.
Manufactured from 316 Stainless Steel.

Speedflow -20AN Male Weld On Fitting.
Manufactured from marine quality 6061-T6 billet aluminium for superior corrosion and fatigue resistance.

Speedflow Part No: 999-20-SS
Speedflow -20AN Male Weld any Order Fitting.
Manufactured from 316 Stainless Steel.

Speedflow -3AN Male Weld On Fitting.
Manufactured from 316 Stainless Steel.

Speedflow -4AN Male Weld On Fitting.
Manufactured from 316 Stainless Steel.