Pro Racing Boots
Hi Temp Silicone, Orange 90° Spark Plug Boots with Terminals, 2 per Card
Designed exclusively for extreme duty racing applications.
Proprietary rubber compound has a higher devulcanizing rating.
Composition absorbs less infra-red radiation.
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance as well as maximum protection against spark loss.

Ignition Lead Cylinder Markers
Suit Leads up to 9mm, Numbered Heat Shrink Tubing
This Sleeving simply slides over the spark plug lead and will shrink tightly around it for a secure connection. Best of all, these sleeves have the cylinder numbers on them so each wire is clearly marked preventing any confusion during thrashes in the pits.

Replacement Terminals
90° Dual Crimp Spark Plug Terminals, Pack of 100

Street Fire Cap and Rotor Kit
GM HEI, V8 Internal Coil
Street Fire is making ignition maintenance easy for you! The cap, rotor and even plug wires all need to be considered as maintenance items. These new Cap and Rotor kits are designed to deliver quality at a value price and are supplied with brass terminals and a heavy duty rotor.

Street Fire CD Ignition
Capacitive Discharge, Adjustable Rev Limiter
Capacitive Discharge Technology
Multiple sparks improve starting and idle
Full power output at high rpm
Easily connects to points, amplifiers and magnetic pickup distributors
Adjustable rev limiter for over rev protection
This Street Fire CD Ignition is perfect for budget minded enthusiasts. The ignition offers capacitive discharge technology and will fire a series of multiple sparks that lasts for 20° of crankshaft rotation when the engine is running under 3,000 rpm. This ensures combustion and produces great throttle response and smooth idle.
 
The CD is built around a durable cast aluminium housing and easily connects to points, amplifiers and magnetic pickup distributors. There's even an adjustable rev limiter for over rev protection!

Distributor Hold Down Clamp
Suit Ford
These clamps are CNC machined from chrome moly steel to produce maximum strength without excessive bulk. The Clamp features a unique three point mounting system that "bites" into the housing ensuring a firm hold. Each Clamp is supplied with a mounting stud, lock washer and stainless nut.

Distributor Hold Down Clamp
Billet, Chevrolet
MSD Billet Distributor Hold Down Clamps are strong enough to keep the timing locked in place whether you are using an MSD Billet Distributor or Pro Mag. The MSD Hold Down Clamp is CNC machined from steel and fits all MSD Pro-Billet Chevrolet distributors and the Pro Mags. Each clamp includes the mounting stud, lock washer and nut.

Firewall Feed Thru
Red, Male HEI Post, 1" Hole Required, Each
Absolutely the best way to route spark plug wire through the firewall
To prevent voltage leaks in passenger compartment mounted coil installations, MSD designed the Firewall Feed-Thru. Moulded from Rynite and nylon, the Firewall Feed-Thru provides 1/2" of insulation to ensure that the coils spark reaches the distributor.

Crank Trigger Signal Pickup
Non-Magnetic, 3/4" x 16 x 2.25",
Replacement Pick-up for Flying Magnet crank trigger kits
MSD Non-Magnetic Pick-Ups are engineered for extreme applications. In fact, this Pick-Up was designed and tested on 300+ mph top fuel dragsters! To live up to MSD demanding expectations in these extreme applications, we took it upon ourselves to design and build the Pick-Ups in-house. This way we can control every aspect of their assembly and quality. Each Pick-Up is hand wound on a special bobbin and terminated to our tinned conductor, Teflon jacketed wiring. These wires are also routed through a strain relief for protection. This assembly is then installed into the precision housing and is potted with a fracture resistant epoxy compound. To ensure that the windings are entirely encased in epoxy, the Pick-Ups undergo a vacuum procedure to remove any air inside the housing. All of these procedures are necessary to produce the strongest, most reliable non /P>

Distributor Cap
For OEM Ford HEI 5.0L EFI 1986-98, MSD Cap-A-Dapt, Black
The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these Cap and Rotor Replacement Kits

Billet Reluctor
CNC Machined Billet Steel, Suit MSD Distributors
To obtain maximum performance, many engine builders actually modify the distributor's reluctor to obtain different timing for each specific cylinder. This Billet Reluctor is designed for these extreme applications. The Reluctor is CNC machined from a billet of steel for absolutely precise dimensions and strength. The steel allows for extra machining without losing strength.

Distributor Rotor
Replacement rotor for MSD Cap-A-Dapt conversion & some Billet Ford Distributors
Comments
The MSD Rotor is injection moulded from strong DuPont Rynite material.

Distributor Cap
Replacement screw-down Cap for Small Diameter MSD Distributors, Black
These caps are injection moulded from DuPont Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong with excellent dielectric properties. Plus, most caps have an optional wire retainer that is supplied with these caps to lock the wires in place.

Distributor Cap and Rotor Kit
Replacement Cap, Rotor & Retainer for Small Diameter MSD Distributors, Red
These caps are injection moulded from DuPont Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong with excellent dielectric properties. Plus, most caps have an optional wire retainer that is supplied with these caps to lock the wires in place.

Distributor Cap
Replacement Cap to suit most MSD Billet Distributors with GM style cap, Red
These caps are injection moulded from DuPont Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong with excellent dielectric properties. Plus, most caps have an optional wire retainer that is supplied with these caps to lock the wires in place.

Distributor Cap
Replacement Cap to suit most MSD Billet Distributors with GM style cap, Black
These caps are injection moulded from DuPont Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong with excellent dielectric properties. Plus, most caps have an optional wire retainer that is supplied with these caps to lock the wires in place.

Distributor Cap and Rotor Kit
Replacement Cap, Rotor & Retainer, suit MSD Billet Distributors w/GM style cap
These caps are injection moulded from DuPont Rynite material and feature spark plug-style terminals. These terminals offer improved locking connections and the Rynite material is extremely strong with excellent dielectric properties. Plus, most caps have an optional wire retainer that is supplied with these caps to lock the wires in place.

Magnetic Pickup
Replacement Magnetic Pickup Assembly, All MSD Billet and Pro-Billet Distributors
The MSD Magnetic Pickup replacement is the same high output assembly that is currently found in all MSD Distributors. It is supplied with the two pin connector installed.
NOTE: Not for use as a replacement on OEM Distributor.

Distributor Rotor
Racing Rotor for MSD Billet and Pro-Billet Distributors
These rotors are designed with high rpm and performance in mind which is why they are standard on most MSD Pro-Billet Distributors. Rotor is injection moulded from Rynite material for incredible strength and high dielectric properties. Plus the stainless steel/brass rotor tip is also screwed in place so it can handle extreme rpm and high heat conditions. The rotors feature deep moulded vanes to stir up the air inside the cap to prevent spark ionisation. The rotor screws are set deep in the housing to prevent spark scatter.
NOTE: Will not fit PN MSD84891, MSD8351and MSD8353 Distributors, use rotor PN MSD84673.

O-Ring Kit
Suit Billet Chev Distributors

RPM Module Selector
Soft Touch Rev Limiter, 6,000-8,200 rpm, 200 rpm Increments
The RPM Module Selector plugs directly into the rpm module socket on all MSD Soft Touch Rev Controls and accessories that use plug-in modules. The user can then select between twelve different rpm limits by simply turning the knob. Six models are available to cover a range from 3,000 rpm to 12,800 rpm in 200 rpm increments.

Vibration Mounts
Rubber Ignition Box Mounts, Set of 4, Suit MSD 7/8/10-Series Ignitions
In many performance applications such as off-road, drag race, marine and oval track racing, strong vibration forces can be transmitted through the chassis to the MSD unit. To protect the MSD from excessive vibration, we recommend the use of these vibration mounts. MSD offers three types of vibration mounts, one for the MSD 5 and 6 Ignitions, one for the MSD 7, 8 and 10 Series, and one for the Pro Power Coil.

Vibration Mounts
Rubber, Suit MSD 5/6 Series Ignition Controls
In many performance applications such as off-road, drag race, marine and oval track racing, strong vibration forces can be transmitted through the chassis to the MSD unit. To protect the MSD from excessive vibration, we recommend the use of these vibration mounts. MSD offers three types of vibration mounts, one for the MSD 5 and 6 Ignitions, one for the MSD 7, 8 and 10 Series, and one for the Pro Power Coil.

Two Pin Connector Kit
MSD's Two Pin Connector Kit replaces damaged connectors or aids in custom wiring. This is the same connector used on MSD's magnetic pick-up harnesses. Each kit comes with two connectors and four pins.

Noise Filter
Removes radio noise
If you experience radio noise after installing the MSD Ignition, you may need to install an MSD Noise Filter. Electro Magnetic Interference (EMI) is occasionally generated from the MSD power cables and can be easily eliminated by installing the Noise Filter on the heavy power supply wires coming from the MSD. When the MSD draws current, it will draw through the Noise Filter instead of directly from the battery, so all other accessories that operate off 12 volts, like the radio, fuel pump, or the engine computer, will be unaffected by the MSD. The Noise Filter will also prevent damage to the MSD during jump-starts and will keep a vehicle's 12-volt line "clean" by removing any voltage and current surges that could interfere with the operation of some MSD accessories such as the Soft Touch Rev Control or the Two Step Module Selector. It is recommended that the Noise Filter be used on installations with the MSD 7 and 8 Series Ignitions to erence.

Pro-Clamp Ignition Lead Separators
Black, 7-9mm, Set of 8
No tools needed to open.
Wires stay in place when cover is removed.
Stand alone or can be bolted down.
The kit is supplied with two 4-wire, two 3-wire and four 2-wire assemblies.
The Pro-Clamp will keep the plug wires in a tidy order and away from engine heat sources. Each Separator features secure grooves for each wire and a top bracket snaps in place to sandwich the wires in place. Each base has a hole for a retaining screw if desired and a tab that will help hold it in position.

Replacement Ignition Leads Boot and Terminal Kit
HEI 90 Degree Boots and dual crimp terminals for Distributor cap, Grey, set of 9
These MSD replacement plug wire boot and terminal kits are perfect for enthusiasts who build their ignition lead sets or need to replace damaged boots. The boots are made from a high temperature silicone compound and feature a grey finish. The terminals have large crimp tabs to grasp the lead, and wide contacts to grip the distributor cap receptacle

Cable Assembly
2 Wire Magnetic Trigger harness, 6 feet long
Use this harness as an extension or replacement to connect a Pro-Billet Distributor to a MSD Ignition control unit.

Cable Assembly
Shielded 2 Wire Magnetic Trigger harness, 6 feet long
This Shielded Magnetic pick-up Cable will help protect the trigger signal from the distributor or crank trigger pick-up from Electro Magnetic Interference (EMI). The pick-up wires are wound together and routed through a special aluminium skinned sleeve that connects to ground. This provides a ground shield around the trigger wires. Use this harness to connect a Pro-Billet Distributor or Crank Trigger to a MSD Ignition control unit.

Tachometer Adapter
Magnetic Pickup Ignition Systems
If you are using the magnetic pick-up input (green and violet wires) to trigger your MSD Ignition, you will need the PN MSD8920 Tach Adapter. This adapter will correct the operation of most voltage triggered tachometers that do not work directly off the tach output terminal of the MSD Control. This Adapter should also be used on current triggered tachs (hooked in series with the ignition switch).

Timing Tapes for Harmonic Balancers
5.250 to 8 in. Diameter Balancer,
Sizes include: 5.25", 6", 6.375", 6.75", 7", 7.25", 7.5" & 8"
Accurate ignition timing is one of the most vital adjustments you can make to your engine. Proper timing can mean the difference between winning and losing a race or even blowing an engine (as a worst case scenario). Recognising the importance of the timing, MSD offers these Timing Tapes. The MSD Timing Tape comes with eight different tapes to fit common balancers ranging from 5.25" to 8" in diameter. The tapes are marked off in one degree increments from 14° ATDC to 64° BTDC and are printed on a tough, chemical resistant material. Not only do the MSD Timing Tapes help you get an exact timing setting, they allow you to see exactly where the Total timing is set. Remember, the Total timing is just as critical as the initial timing and the MSD Timing Tape will help you ensure that it is set accurately.

Ford Chrome Coil Bracket Fits Most Cylinder Shaped Coils

Distributor Rotor
Adjustable, suit most MSD Billet Distributors
When you install EFI on your engine, most systems will require the ignition timing to be advanced for the ECU. This can cause issues with rotor phasing, but the new Adjustable Rotor remedies this issue! The Rotor is based on MSD popular PN MSD8467 Race Rotor so it will install on most any MSD distributor with a PN MSD8433 or MSD8431 cap. The Rotor offers up to 20° of advance or retard and is easy to set up with accurate one degree detent adjustments.

RPM Module Kit
4,000 to 4,800 rpm
RPM Module Kits include five modules in 200 rpm increments. Each kit is within a 1,000 rpm range.

Bulk Super Conductor Ignition Lead
Red, 8.5mm, Sold per Foot
Copper alloy conductor has a resistance value of less than 50 ohms per foot for superior spark
Ferro-magnetic impregnated core creates an effective EMI choke
Forty feet of conductor is wound into a single foot of wire for high EMI suppression
Conductor core features Dupont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
The MSD 8.5mm Super Conductor is the ultimate performance wire! Its extremely low-resistance combined with the ability to suppress Electro Magnetic Interference is a combination that defies the common laws of physics. Less resistance means more energy is going to make it to the spark plug to ignite the air/fuel mixture. The Super Conductor uses a copper alloy conductor resulting in less than 50 ohms per foot of wire! This ensures that the most energy possible makes it to the ination is encased in a heavy duty sleeve that will withstand abrasion and high temperatures. Cap off each end with our Dual Crimp Terminals and you have the best wire available!

Flying Magnet Crank Trigger
Small Block Chevy, with 7" Harmonic Balancer, Black Anodised Billet Aluminium

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD Flying Magnet Crank Trigger system does exactly that by using four magnets embedded in an aluminum wheel. Although similar in appearance to other crank triggers, the MSD Flying Magnet design works on a different principle.

Most crank triggers have a wheel, with steel studs sticking out, bolted to the harmonic balancer. As the crankshaft turns, the studs pass by a stationary magnetic pick-up, triggering the ignition. This pick-up can be triggered by other bolts, debris or even vibrations which will cause a loss of power or engine damage. The MSD Flying Magnet Crank Trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This "flying magnet" design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered.

Each Flying Magnet Crank Trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver's side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The CNC-machined aluminum bracket securely holds the pick-up in place and is slotted to provide a wide range of timing adjustment. Spacers are included so you can mount the bracket on engines with standard motor mounts or engines with a .250" motor plate. These systems will trigger MSD 6, 7 and 8 Series Ignitions and all MSD Timing Accessories.

Features:

• 7" Diameter
• Absolutely the most accurate way to trigger the ignition.
• The non-magnetic pickup cannot be false triggered.
• Powerful magnets are embedded in a billet aluminum trigger wheel.
• Kits feature special brackets and mounting hardware for a variety of engines.

MSD's flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.

2-Step Launch Control 
Designed for GM LS-engines only, Brake Launch Control 

GM Performance fans will be geeked to learn about this direct plug-in 2-Step Launch Control! The unit is easy to connect with factory style connectors and lets the users set an rpm limit to activate from the holeshot! When you're staged, you can hold the pedal to the floor while the rpm stays at a consistent level producing consistent holeshots.

• 2 Step Rev Limiter for LSX engines.
• Plug and Play.
• Can be used with 24x or 58x trigger wheels.

Vibration Mounts 
Rubber, Suit Pro-Mag 44 Amp Coil 

In many performance applications such as off-road, drag race, marine and oval track racing, strong vibration forces can be transmitted through the chassis to the MSD unit. To protect the MSD from excessive vibration, we recommend the use of these vibration mounts. MSD offers three types of vibration mounts, one for the MSD 5 and 6 Ignitions, one for the MSD 7, 8 and 10 Series, and one for the Pro Power Coil.

Complete module assembly with magnetic pick-up for Allstar (ALL81222, ALL81240, ALL81242, ALL81244) distributors has pre-terminated ends. Includes a tension grommet and three wire connector.

Billet Aluminum Crank Trigger Wheel for a Small Block Ford 6.5? damper with OEM Ford 4 Bolt Pulley Pattern. 12-Magnet Version that works with Innovators West Crank Trigger Sensor & Brackets or MSD. Application: Small Block Ford 12-Magnet Version Uses High Quality Neodymium Magnets

Whether your engine has forced induction or is naturally aspirated, these Holley MAP sensors will keep your engine performing at its best. They're available in 1, 2, and 3-bar models.

Advance Kit
Spring and Bushing kit
The MSD Distributor Advance Kits are the same kits that come with your MSD Distributor. The kit contains an assortment of springs and advance limit bushings.

Billet Aluminum Crank Trigger Sensor Bracket for Small Block Ford Passenger Side mount, fully compatible with Innovators West Dampers with built in Flying Magnet, or with MSD Separate Magnet Wheel. Options include 5/16″ lower timing cover mounting bolts and spacers which are often used on OEM and Dart Blocks. Also available are 3/8″ mounting bolts and spacers, typically used on older Ford SVO blocks. Application: Small Block Ford Works with Standard 3/4-16 Crank Trigger Sensors 5/16″ or 3/8″ Mounting Holes Passenger Side Mount Course and Fine Timing Adjustments Includes mounting hardware and spacers for easy passenger side mounting. Works with MSD #8276 and Innovators West #964 Crank Trigger Sensors.

Billet Aluminum Crank Trigger Wheel for Small Block Chevy. 12-Magnet Version that works with Innovators West Crank Trigger Sensor & Brackets or MSD. Application: Small Block Chevy 12-Magnet Version Uses High Quality Neodymium Magnets NOTE: This trigger wheel will only work with flange mount oil pump mandrels and pulleys with an OEM SBC 1.245″ male register.

Billet Aluminum Crank Trigger Wheel for Big Block Ford (460). 12-Magnet Version that works with Innovators West Crank Trigger Sensor & Brackets or MSD. Application: Big Block Ford (460) 12-Magnet Version Uses High Quality Neodymium Magnets NOTE: This trigger wheel will only work with dampers that have OEM 4-Bolt pulley bolt patterns and OEM pulley register. For dampers with a BBC bolt pattern and BBC register, please see the BBC Trigger Wheels.

Billet Aluminum Crank Trigger Sensor Bracket for Small Block Chevy. Mounts on Passenger Side of block and is compatible with Innovators West Dampers with built in Flying Magnet, or with our add-on Magnet Wheel. Application: 1955 – 2003 Small Block Chevy Works with Standard 3/4-16 Crank Trigger Sensors Passenger Side Mount Course and Fine Timing Adjustments Includes mounting hardware and spacers for easy passenger or driver’s side mounting. Works with MSD #8276 and Innovators West #964 Crank Trigger Sensors.

3/4-16 UNF Flying Magnet Crank Trigger Sensor. Directly replaces MSD #8276 and features same style electrical plug and thread size. Compatible with MSD Ignition Systems and others that use Flying Magnet Style.

Billet Aluminum Crank Trigger Sensor Bracket for 351 Cleveland Passenger Side mount, fully compatible with Innovators West Dampers with built in Flying Magnet, or with MSD Separate Magnet Wheel. Application: 351 Cleveland Works with Standard 3/4-16 Crank Trigger Sensors Passenger Side Mount Course and Fine Timing Adjustments Includes mounting hardware and spacers for easy passenger side mounting. Works with MSD #8276 and Innovators West #964 Crank Trigger Sensors.

Billet Aluminum Crank Trigger Sensor Bracket for Small Block Ford Passenger Side mount, fully compatible with Innovators West Dampers with built in Flying Magnet, or with MSD Separate Magnet Wheel. Options include 5/16? lower timing cover mounting bolts and spacers which are often used on OEM and Dart Blocks. Also available are 3/8? mounting bolts and spacers, typically used on older Ford SVO blocks. Application: Small Block Ford Works with Standard 3/4-16 Crank Trigger Sensors 5/16? Mounting Holes Passenger Side Mount Course and Fine Timing Adjustments Includes mounting hardware and spacers for easy passenger side mounting. Works with MSD #8276 and Innovators West #964 Crank Trigger Sensors. NOTE: This bracket is designed for use with the #204 stock offset damper. If being used with a different part number of IW damper or another brand of damper, the provided bracket, bolts and/or spacers may need to be modified to make fit with your combination of parts.

Billet Aluminum Crank Trigger Sensor Bracket for Big Block Chevy. Mounts on Passenger Side of block and is compatible with Innovators West Dampers with built in Flying Magnet, or with MSD Separate Magnet Wheel. Application: Big Block Chevy Works with Standard 3/4-16 Crank Trigger Sensors Passenger Side Mount (Drivers Side Available #1064) Course and Fine Timing Adjustments Includes mounting hardware and spacers for easy passenger side mounting. Works with MSD #8276 and Innovators West #964