Thread Sealer
50 mil (1.69 oz) Tube
ARP THREAD SEALER is a premium grade thread sealer that is designed for use on all wet deck cylinder block applications in order to prevent coolant leakage past the head bolt threads, while duplicating the recommended installation pre-loads associated with all ARP cylinder head bolts and studs. ARP thread sealer can also be used on pipe plugs, pipe fittings, fuel line fittings or any fitting that requires a flexible leak proof seal. ARP thread sealer is designed for use on aluminium, steel, stainless steel and plastic materials against coolants, water, gasoline, oil, natural gas and LPG.
 
PTFE based formula w/rust & corrosion inhibitors.
Effective range: -30° to 550°F.
Application: delivers a flexible leak-proof seal in aluminium, steel, stainless steel and plastic against coolants, water, gasoline,
natural gas and LPG.
Sealant range: 10,000 psi (pressure).
Designed for use with bolts

Oil Pump Drive Shaft
Suit SB Ford 351 Windsor
Lose Oil Pressure And The Engi ne Is Trash! Now You Don't Hav e To Depend On A Stock Oil Pum p Drive Shaft In Your Expensiv e High Performance Or Wet Sump Racing Engine. Arp Oil Pump D rive Shafts Are Made From Heat Treated, Premium, Aerospace C hrome Moly. Plus, We've Increa sed The Body Diameter To Make It Tougher - More Able To Hand le The Added Torque Requiremen ts Of Increased Capacity Oil P umps Or Heavy Viscosity Racing Lubricants. Rated At 170,000p si The Added Tensile Strength Delivers Longer Service Life O f This Critical Component.

Oil Pump Drive Shaft
Suit SB Ford 289-302 Windsor including 5.0L & Boss 302
Lose Oil Pressure And The Engine Is Trash! Now You Don't Have To Depend On A Stock Oil Pump Drive Shaft In Your Expensive High Performance or Wet Sump Racing Engine.
Arp Oil Pump Drive Shafts Are Made From Heat Treated, Premium, Aerospace Chrome Moly. Plus, We've Increased The Body Diameter To Make It Tougher - More Able To Handle The Added Torque Requirements Of Increased Capacity Oil Pumps Or Heavy Viscosity Racing Lubricants. Rated At 170,000psi The Added Tensile Strength Delivers Longer Service Life Of This Critical Component.

Oil Pump Drive Shaft
Suit Ford 302-351 Cleveland & 351-400M
Lose Oil Pressure And The Engi ne Is Trash! Now You Don't Hav e To Depend On A Stock Oil Pum p Drive Shaft In Your Expensiv e High Performance Or Wet Sump Racing Engine. Arp Oil Pump D rive Shafts Are Made From Heat Treated, Premium, Aerospace C hrome Moly. Plus, We've Increa sed The Body Diameter To Make It Tougher - More Able To Hand le The Added Torque Requiremen ts Of Increased Capacity Oil P umps Or Heavy Viscosity Racing Lubricants. Rated At 170,000p si The Added Tensile Strength Delivers Longer Service Life O f This Critical Component.

Conrod Washer
7/16" I.D x .675" O.D x .062" Thick With Chamfer (Single)

Special Purpose Washer
7/16" I.D, 13/16" O.D .120" Thick with Chamfer (Single)

Special Purpose Washer
7/16" I.D, 3/4" O.D .120" Thick (Single)

Special Purpose Washer
7/16" I.D, 3/4" O.D .120" Thick with Chamfer (Single)

Special Purpose Washer
7/16" I.D, 13/16" O.D .120" Thick, 10-Pack

Special Purpose Washer
7/16" I.D, 13/16" O.D .120" Thick, 10-Pack

Special Purpose Washer
1/2" I.D, 7/8" O.D .120" Thick with Chamfer, 10-Pack

Special Purpose Washer
5/16" I.D, .550" O.D .095" Thick with Chamfer (Single)

Hex Nut With No Flange, Chrome Moly
7/16-20 Thread x 11/16" Socket (Single)
Constructed From The Finest Ae rospace-quality Materials, Hex Nuts Are Available In Most Si zes. All Hex Nuts Meet Arp's E xacting Quality Control Standa rds And Are Black Oxided. All Hex Nuts Are Rated 180,000psi Tensile Strength

Hex Nut With No Flange, Chrome Moly
1/2-20 Thread x 3/4" Socket (Single)
Constructed From The Finest Ae rospace-quality Materials, Hex Nuts Are Available In Most Si zes. All Hex Nuts Meet Arp's E xacting Quality Control Standa rds And Are Black Oxided. All Hex Nuts Are Rated 180,000psi Tensile Strength

Exhaust Header Bolt Kit, Hex Head Black Oxide
Universal, 3/8" Thread X .750" UHL (12 Pack)

GENERAL PURPOSE WASHERS

Quality washers for many applications, such as attaching accessories, chassis components, etc. They are not of the hardness required for use on cylinder heads, mains and connecting rods. Available in black oxide and stainless steel. Stainless demonstrates excellent corrosion resistance. Washers have over-sized I.D. (inside diameter) to clear most under-bolt head radii. Available for 1/4, 5/16, 3/8, 7/16, 1/2" and 10mm shank bolts and studs.

12-Point Nut, Chrome Moly Black Oxide
3/8" UNF Thread, 1/2" Socket (10-Pack)

12-Point Nut, Chrome Moly Black Oxide
10mm X 1.25 Thread, 12mm Socket (10 Pack)


1= 10mm X 1.25
2= 10.2 (.400")
3= 15.9 (.625")
4= 12mm

12-Point Nut, Chrome Moly Black Oxide
10mm X 1.25 Thread, 12mm Socket (Single Nut)


1= 10mm X 1.25
2= 10.2 (.400")
3= 17.8 (.700")
4= 12mm

12-Point Nut, Chrome Moly Black Oxide
10mm X 1.25 Thread, 12mm Socket Small Collar (Single Nut)


1= 10mm X 1.25
2= 10.2 (.400")
3= 15.9 (.625")
4= 12mm

12-Point Nut, Chrome Moly Black Oxide
12mm X 1.25 Thread, 14mm Socket (10 Pack)


1= 12mm X 1.25
2= 12.8 (.504")
3= 20.9 (.823")
4= 14mm

12-Point Nut, Chrome Moly Black Oxide
1/2" UNF Thread, 9/16" Socket (10-Pack)

11available In A Variety Of Si zes To Suit Your Needs, All Ar p 12-point Nuts Are Constructe d From Aerospace Quality Mater ials And Meet Their High Stand ards Of Excellence. Rated 180, 000 Psi Tensile Strength.

12-Point Nut, Chrome Moly Black Oxide
3/8" UNF Thread, 7/16" Socket (10-Pack)


1= 3/8"-24
2= .390"
3= .625"
4= 7/16"

12-Point Nut, Chrome Moly Black Oxide
5/16" UNF Thread, 3/8" Socket (10-Pack)


1= 5/16"-28
2= .348"
3= .526"
4= 3/8"

12-Point Nut, Chrome Moly Black Oxide
5/16" UNF Thread, 3/8" Socket (2-Pack)


1= 5/16"-28
2= .348"
3= .526"
4= 3/8"

12-Point Nut, Chrome Moly Black Oxide
8mm X 1.25 Thread, 10mm Socket (10 Pack)


1= 8mm X 1.25
2= 8.1 (.320")
3= 13.6 (.535")
4= 10mm

Special Purpose Washer
3/8" I.D, 5/8" O.D .062" Thick With Chamfer (10-Pack)

Special Purpose Washer
7/16" I.D, 3/4" O.D .073" Thick With Chamfer (2-Pack)

Hex Nut With Flange, Chrome Moly
7/16" UNF Thread x 11/16" Socket (10-Pack)

Hex Nut With Flange, Chrome Moly
7/16" UNF Thread x 5/8" Socket (10-Pack)

Special Purpose Washer
7/16" I.D, 13/16" O.D .120" Thick with Chamfer (10-Pack)

Special Purpose Washer
7/16" I.D, 7/8" O.D .120 Thick with Chamfer (10-Pack)