Harmonic Balancer Installer & Remover
Fits GM, Ford & Chrysler With Carry Case
Fits all Ford, GM, and Chrysler engines with the adapter/shaft thread sizes listed below. This heavy-duty, professional tool, equipped with roller thrust bearings, can also be used as a universal puller! In addition to the 3/4 x 16 shaft, the kit includes 7/16 x 20, 5/8 x 18, 1/2 x 20 adapters, and various removal hardware. May also be used for steering wheel and pulley installation and removal. Maximum recommended torque is 150 ft. lbs.

Adjustable Ring Compressor (Blue)
Suits 4.000" to 4.090" Bore
Putting the connecting rod through first, simply place the piston (with rings) into the tapered end of the ring compressor. Tighten the compressor snugly around the base of the piston. Then lay the compressor flat on the engine cylinder bore.

Valve Spring Compressor
Stud Mount Suit 3/8" & 7/16" Studs
For all 3/8" and 7/16" Rocker Studs. Remove valve spring from an assembled engine for checking or replacing quickly and easily. Press down to compress coil spring, then remove valve keepers. Release slowly.

Replacement Ring Filer Disc
Suit PR66785 120 Grit

Universal Degree Wheel Kit
Suit Heads On Application
For use with heads on engine. This kit contains all the tools needed to degree cams in the most popular engines, assuring proper cam timing and lobe lift. Features deluxe components including 9" degree wheel, dial indicator, dial indicator mount, 2 valve check springs, clamp kit, 14mm top dead center locator, wire degree wheel pointer, detailed instructions, and a durable foam padded carrying case.

Valve Spring Height Micrometer
Height Range 1.600" - 2.100"
Measure installed valve spring height conveniently and accurately. Simply install the height micrometer instead of a valve spring, and then rotate the clearly engraved dial to expand the tool to seat the valve, locks and retainer. Fits most V8 engines.

Carburettor Float Adjusting Tool
5/8" Socket With Flat Blade Screwdriver & Handle Incorporated
No more slight-of-hand tricks! Easily adjust your carburetor float level with this hand float adjustment tool. 5/8" socket and built-in screwdriver blade protects your engine and hands from fuel spray.

Tapered Ring Compressor
4.040" Bore
The PROFORM tapered ring compressor is an affordable an easy way to install your pistons! By creating a slight squeeze on the piston ring the compressor eases the piston into the cylinder bore. Manufactured for engine blocks with studs.

Valve Lash Wrench Set
5/8" With 3/16" & 7/32" Hex T-Bar
T-Handles. This simple T-handle and wrench set makes adjustment very easy, cutting the adjusting time in half. Simply position the adjusting handle wrench over the rocker arm lock-down (make sure you have purchased the set with the proper sized wrench), and drop the appropriate T-handle down through the hole in the wrench - with one hand doing the job of two! Then make the lash adjustment with a feeler gauge according to the camshaft manufacturer's specifications.