Yella Terra Steel Flywheels & Flexplate
Most OEM stock Flywheels/Flexplates are heavy cast iron parts designed for optimum road driveability. Although this may be important for everyday road cars, this driveability comes at the expense of engine response and acceleration and is not suited to performance or race vehicles. These cast iron Flywheels/Flexplates are also prone to catastrophic failure under extreme conditions and so for safety reasons only approved billet Flywheels/Flexplates are now required equipment in most motorsport applications.
Yella Terra designs and manufactures a large range of high performance quality billet Flywheels/Flexplates for the street and race track. The Yella Terra Flywheels/Flextplates are precision CNC machined from a solid steel billet and fitted with an OEM quality ring gear. They are available in a choice of standard and lightweight models. Some popular applications are also available in the new ultra lightweight reduced peripheral mass (RPM) designs that are effectively as light as alloy but with the strength of steel.
All Yella Terra Flywheels/Flexplates are SFI approved, making them safe to be used in motorsport applications and are in accordance with the specifications set out by SFI sanctioning bodies.
Features :
Billet Flywheels made to suit standard, road performance, drag racing and circuit racing applications
Precision CNC machined from a solid high carbon steel billet
Fitted with OEM quality gear ring
Available in ultra lightweight peripheral mass (RPM) designs
The Yella Terra YT 9912 Billet Steel Explosion proof flex plate is designed for high performance Nissan RB30 engine equipped with the JATCO Automatic transmissions that are used in Drag racing or tough street car applications.
It is designed to be incredibly light, and give excellent engine response and great acceleration in race applications and to avoid Fretting that can often happen with the OEM style pressed steel flex plates.
Please note: Ring Gear is not included, reuse the ring gear from your original flex plate (if in good serviceable condition) and weld to the points provide for best results

S/T Roller Rocker Set 1.72 Ratio (5/16" Bolt on Adjustable)
Suit Ford 302-351C, 429-460
Street Terra Features:
Economically priced rocker set for popular applications with strong vacuum die cast arm designed for high performance street and budget race applications with stock or mild camshafts and mildly stronger valve springs.
Ultra reliable standard replacement for pressed metal rockers on stock engines.
Best quality hardware including oversize ground trunnions and needle roller bearings for durability and low friction.
No comparable product has these critical features.
Available in Unique "EASY FIT" and traditional stud type designs.

1.7 RATIO - 5/16" HYD PEDESTAL MOUNT Ford Cleveland/ Big Block 302-460 V8 Street Terra Roller Rockers Street Terra The best value rocker arm on the market today. Engineered to meet or exceed the needs of performance street and sportsman race applications. Our vacuum die cast arm is designed and engineered for optimum strength without the costs associated with billet CNC machining. The Street Terra series utilises the extreme duty hardware from our premium Platinum race series - ensuring a lifetime of trouble free performance. Our easyfit (EF) kits are a cost effective alternative for factory stamped steel rocker arms, which can be installed within less than an hour without cylinder head removal and in most cases without machining. Our wide range of true ratios allows you to achieve high lift without relying solely on your camshaft… a trend many engine builders and racers alike are adopting to relieve the inertia on lifters and pushrods generated by aggressive and often violent ramp rates required to make big lift. Popular amongst standard rebuilds where OEM equipment is worn and or scarce, as well as mild street applications.

S/T Roller Rocker (Set) 1.65 Ratio (5/16" Mount, Shaft Bolt-On Adjustable)
Suit Holden 253-308
Street Terra Features:
Economically priced rocker set for popular applications with strong vacuum die cast arm designed for high performance street and budget race applications with stock or mild camshafts and mildly stronger valve springs.
Ultra reliable standard replacement for pressed metal rockers on stock engines.
Best quality hardware including oversize ground trunnions and needle roller bearings for durability and low friction.
No comparable product has these critical features.
Available in Unique "EASY FIT" and traditional stud type designs.

1.73 RATIO - 7/16" STUD Ford V8 Cleveland & 429-460 Pro Street Roller Rockers Pro Street Designed for high revving street/strip applications. No other comparable product can compete with 600lbs* maximum open spring pressure whilst retaining factory size bolt-down hardware. Manufactured and assembled in Australia using the highest quality materials and componentry consistent with those found in our Platinum race series. Our wide range of true ratios allows you to achieve high lift without relying solely on your camshaft… a trend many engine builders and racers alike are adopting to relieve the inertia on lifters and pushrods generated by aggressive and often violent ramp rates required to make big lift. Ideal for harsh street and strip applications, these rockers have got what it takes to last!

Steel Flywheel
Ford V8 External Balance 11" Diameter
Yella Terra Steel Flywheels & Flexplate
Most OEM stock Flywheels/Flexplates are heavy cast iron parts designed for optimum road driveability. Although this may be important for everyday road cars, this driveability comes at the expense of engine response and acceleration and is not suited to performance or race vehicles. These cast iron Flywheels/Flexplates are also prone to catastrophic failure under extreme conditions and so for safety reasons only approved billet Flywheels/Flexplates are now required equipment in most motorsport applications.
Yella Terra designs and manufactures a large range of high performance quality billet Flywheels/Flexplates for the street and race track. The Yella Terra Flywheels/Flextplates are precision CNC machined from a solid steel billet and fitted with an OEM quality ring gear. They are available in a choice of standard and lightweight models. Some popular applications are also available in the new ultra lightweight reduced peripheral mass (RPM) designs that are effectively as light as alloy but with the strength of steel.
All Yella Terra Flywheels/Flexplates are SFI approved, making them safe to be used in motorsport applications and are in accordance with the specifications set out by SFI sanctioning bodies.
Features :
Billet Flywheels made to suit standard, road performance, drag racing and circuit racing applications
Precision CNC machined from a solid high carbon steel billet
Fitted with OEM quality gear ring
Available in ultra lightweight peripheral mass (RPM) designs